About RTK Mountpoint

general
1

Hello, we bought a ntrip service from a local seller. However, we cannot enter mountpoint name because they use VRS,FKP or MAC. This is not my field, so I do not know what is the wrong. How can I solve this problem? And I put a info about publish protocol of our seller.

" TUSAGA-Aktif System Network-RTK Correction Data is broadcast in the following international standard formats: VRSRTCM3.1, VRSCMRP, RTCM3Net, FKP_RTCM31, and DGPSNet.

Real-time Network-RTK Correction Data is derived from GNSS station data, which is processed at the Control Center every second. The data is then transmitted using the NTRIP protocol in compliance with RTCM (The Radio Technical Commission for Maritime Services) standards.

Various techniques, including VRS (Virtual Reference Station), FKP (Flächenkorrekturparameter), and MAC (Master-Auxiliary Concept), are utilized for correction data dissemination. The VRS method generates and provides correction data from a virtual reference station that moves along with the user, ensuring errors are minimized and the entire network’s data is taken into account."

Thanks for your time.
Best regards,

2

Hi Ali,

we support RTCM3.x messages and need data from a physical base station currently (therefore the VRS won’t work) properly. So I. suggest using mountpoints that use the Master-Auxiliary Concept.

On a short review, I noticed that are multiple abse stations in Turkey… what you will need to do is find the IP address, port, and Mountpoint related to the closest one and input at the GPS NTRIP tab of your settings tab.